Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Washers (#2) 2ea Lock Nuts (#3) 1ea Mounting Ring (#11) 2ea Mounting Screws (#12)
2ea Outlet Box Screws (#13) 3ea Wire Connectors (#14) 1ea Ground Screw (#15)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#12) into the Mounting Ring (#11). Attach the Mounting
Ring (#11) to the Outlet Box (#10) using the two Outlet Box Screws (#13). [Make sure the
threads of the Mounting Screws (#12) are facing outside when the Mounting Ring (#11) is
attached to the Outlet Box (#10).]
2. Wrap the ground wire from the fixture around the Ground Screw (#15) on the Mounting
Ring (#11), and then connect the ground wire from the fixture to the ground wire from the
Outlet Box (#10). Connect the white wire from the fixture to the white wire (neutral wire)
from the Outlet Box (#10). Connect the black wire from the fixture to the black wire (live
wire) from the Outlet Box (#10). Cover the three wire connections using the three Wire
Connectors (#14). Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#10). Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3. Place the fixture body on the wall by aligning the two protruding Mounting Screws (#12)
through the appropriate holes on the Wall Plate (#1). Place the two Washers (#2) around
the two Mounting Screws (#12). Screw the two Lock Nuts (#3) onto the two Mounting
Screws (#12) until the Wall Plate (#1) is held firmly against the wall.
4. Once the fixture is mounted on the wall, caulk the space between the wall and the upper
3/4 area of the Wall Plate (#1) to prevent water seeping into the Outlet Box (#10). Leave
the bottom 1/4 area uncaulked for drainage of any water which might leak into the
enclosure.
5. Before completing Installation, please return to Assembly Instruction #3.
6. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light
switch on to activate the fixture.