Instructions / Assembly

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
3 Installing the light fixture
□ After wires are connected, tuck them carefully inside
the outlet box.
□ Raise the canopy (A) allowing for the mounting screws (BB)
to protrude through the key slots. Rotate the canopy (A)
clockwise until the mounting screws (BB) are in the narrow
part of the key slots, and tighten with a screwdriver.
Care and Cleaning
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
Possible Cause Solution
□ The bulb is burned out. □ Replace the light bulb.
□ The power is off. □ Ensure that the power supply is
turned on.
□ There is a faulty wire connection. □ Check the wiring.
The bulb will not light.
□ The circuit breaker is off. □ Ensure that the circuit breaker is
set in the On position.
The fuse blows or a
circuit breaker trips when
the light is turned on.
□ Discontinue use of the light
fixture.
□ Contact a qualified electrician or
call the Customer Service Team
at 1-855-HD-HAMPTON.
□ Unplug other items on the
circuit.