INSTRUCTION MANUAL BATH BAR Chrome Finish Home Depot SKU 644-291 (UPC008938102100) 1
Thank you for purchasing this Hampton Bay interior bath bar. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. 2. 3. Designed with 6 - 100 watt bulb sockets. Compatible with any standard 120 volt incandescent dimmer switch. Wall mountable only. QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1877-527-0313 or visit www.homedepot.com. Please reference SKU 644-291, UPC 008938102100.
drill holes in the wall for the fasteners. The narrow end of the keyhole slot should face up. 5. Make electrical connections. ELECTRICAL CONNECTIONS: a. b. c. d. e. f. Connect the white wire(s) from the fixture to the white wire of the supply circuit. Connect the black wire(s) from the fixture to the black wire of the supply circuit. Connect the green colored (or bare copper) wire to the grounding conductor of the supply circuit. Use U.L.
TROUBLE SHOOTING: Problem Light Bulb will not illuminate. Fuse blows or circuit breaker trips when light bulb is illuminated. Possible Cause 1. Light bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch. Crossed wires or power wire is grounding out. Corrective Action 1. Replace light bulb. 2. Make sure power supply is on. 3. Check wiring. 4. Test or replace switch. Check wire connections. PRODUCT MAINTENANCE: 1.
