Installation Guide

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation - Existing Construction (continued)
4
Removing the motor and power line
□ Loosen the three screws where indicated by the arrows.
□ Press the metal clip (1) and remove the motor and power
line (2) from the housing (A).
1
2
5
Removing the duct
□ Loosen the one screw from the housing (A) and remove the
duct connector (1).
1
6
Removing the junction box
□ Remove the junction box (1) from the housing (A) by
loosening and removing the screw (2).
1
2