Instructions / Assembly

10
Installation (continued)
Care and Cleaning
□ Before servicing or cleaning the unit, disconnect
the power supply at the panel and lock to prevent
the power from being turned on. If the panel
cannot be locked, clearly mark the panel with a
warning tag to prevent the power from being
turned on.
□ Remove the grill by squeezing the springs and
pulling the grill down.
□ Wash and clean the grill in a sink and dry with a
cloth.
□ Remove dust and dirt from the fan housing with a
vacuum cleaner.
□ Dampen a cloth with dish detergent, wipe the fan
housing and dry with a cloth.
□ Replace the grill.
□ To reduce the risk of fire, always vent fans to the
exterior and in compliance with local codes. Do
not vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces, or garages.
□ Unplug or disconnect the appliance from the
power supply before servicing.
CAUTION: Do not use solvents, thinner or harsh
chemicals for cleaning the fan.
CAUTION: Do not allow water to enter the motor.
CAUTION: Do not immerse resin parts in water
over 140° F (60° C).
8
Mounting the grill
□ Use the spring clips to pinch mount and insert the
grill (B) into the narrow rectangular slots inside of
the fan housing next to the fan motor.