Instructions / Assembly

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Finial (#1) 1ea Lock Washer (#2) 1ea Top Cover (#3) 2ea Lock Nuts (#7)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Install up to a 100 watt incandescent Light Bulb (#8) (not included) or
Listed SBCFL (Self-Ballasted Compact Fluorescent Lamp) (not included)
in the socket in the Fixture Frame (#17). Do not exceed a 100 watt
incandescent light bulb, or a 32 watt SBCFL.
3. Place the Nipple (#4) onto the Harp (#6) by screwing the Hex Nut (#5) into
position. Attach the Harp (#6) and the Nipple (#4) to the fixture by
screwing the two Lock Nuts (#7) into place.
4. Place the Top Cover (#3) and then the Lock Washer (#2) over the Nipple
(#4). Secure the Top Cover (#3) by screwing the Finial (#1) to the end of
the Nipple (#4).