Installation Guide

5
BEFORE YOU START
THINGS TO CONSIDER
TOOLS REQUIRED
Check Your Order
Make sure the product label on each carton matches the product numbers on your order
and project plan. Contact Hampton Bay Customer Service if there are any damaged,
missing or incorrect cabinets. Do not install if damaged or parts are missing.
Read this Entire Guide
Before starting the installation, read this entire guide to familiarize yourself with the
precautions for installing cabinetry.
Know Your Project
Take time to review your installation project,
what cabinets you have and how they will
ttogether.Thiswilldeterminewhereyou
should start your installation. Make sure
appliance locations, windows and entryways
are considered.
Read through these instructions, noting any
special requirements your cabinets may
need for installation. Cabinets such as base
corner, wall bridge and base cabinets
in a corner have special requirements.
Some of these special requirements may
be found in the Installation section of
these instructions.
Any installation of any product not performed according to the methods presented in this
guide could void the warranty of the product.
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
WARNING: If the installation is performed in an unsafe or incorrect
manner, a cabinet could fall off the wall and result in serious injury
or death.
WARNING: Cabinets are not intended to be freestanding units,
they must be attached to a wall stud or anchored to the oor to
achieve sufcient stability. Failure to comply with these guidelines
will void all warranties and claims.
PRE-INSTALLATION
Safety
Glasses
Stud
Finder
Screwdriver Protractor
Compass
Clamps
x2
Measuring
Tape
6' Level PencilDrill
Ledger Board
Screwdriver
"T" Brace
Drill
Clamp
Wall Outline