Installation Guide

10
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
NOTICE: Install cabinets using the screws shown below. Screws must be
purchased separately.
The instructions in this booklet apply only to 16" on center wood stud construction.
All other types of installation should be done by a professional.
#10 x 2-1/2" Round Washer Head with No. 2
Square Recess Drive (or Truss Head with Phillips Drive) screw
for frame-to-frame attachment and hangrail-to-wall attachment
(Screws must be purchased separately.)
#10 x 3-1/2" Truss Head with Phillips Drive
forattachingcabinetstoceilingjoistsorasoft
(Screws must be purchased separately.)
SCREWS REQUIRED
NO NAILS OR DRYWALL SCREWS
WARNING: DO NOT use nails or drywall screws to install base or
wall cabinets. Use the recommended screws as shown in this guide.
Using nails or drywall screws may result in cabinets falling from the
wall. Cabinets installed with nails or drywall screws will void the
product warranty.
2-1/2"
3-1/2"
INSTALLATION
REQUIREMENTS (CONTINUED)