Instructions / Assembly

Page 5
ASSEMBLY INSTRUCTIONS:
1.Screw the pole (B) clockwise into the base (A) to
tighten.
2.Screw the pole (C) clockwise into the pole (B) to
tighten.
3.Screw the pole (D) clockwise into the pole (C) to
tighten.
4.Screw the pole (G) clockwise into the pole (D) to
tighten. and pull the remaining slack of the power
cord out carefully through point (H).
5.Attach the shade
(E) to the shade holder cup (F) by
aligning the open end of the wider recessed
groove located on the shade (E) with the wider
securement bump of the shade holder cup(F),and
sliding the shade (E) inside the shade holder cup (F)
and turning it clockwise until it locks place.