Item #000-000 Model #89549 USE AND CARE GUIDE 3-LIGHT INVERTED PENDANT CEILING FIXTURE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313 HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . .
Pre-Installation Please read and understand this entire manual before attempting to assemble, operate, or install the product. NOTE: Before beginning assembly of this product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the product. TOOLS REQUIRED Claw hammer Safety goggles Phillips screwdriver Wire strippers Electrical tape Ladder Pliers HARDWARE INCLUDED GND NOTE: Hardware not shown to actual size .
Pre-Installation (continued) PACKAGE CONTENTS A D C E F G L B J K H P N O I M Part Description Quantity Part 1 I J Finial Outer Shade 1 K L M N O P Coupling Arm Decorative Cap Nylon Washer Metal Washer Inner Shade 1 3 1 A B Canopy Socket Assembly C D E F G H Screw Collar Ring Screw Collar Loop Chain Fixture Loop 1 1 1 Threaded Post Threaded Pipe 1 1 1 1 4 Description Quantity 1 2 2 1
Installation 1 Installing the mounting bracket Orient the mounting bracket (DD) so that the raised center portion protrudes into the outlet box. Connect the mounting bracket (DD) to the outlet box with machine screws (BB). Screw the threaded nipple (EE) into the screw collar loop (D) a minimum of 1/4 in. Lock it in place with a hex nut (CC). Thread another hex nut (CC) to the center of the threaded nipple (EE), and screw the threaded nipple (EE) into the mounting bracket (DD).
Installation 3 Making the electrical connections BARE COPPER, OR GREEN GROUND FIXTURE WIRE BARE COPPER, OR GREEN GROUND SUPPLY WIRE DANGER: Hazardous voltages cause severe injury or death. Disconnect all sources of power before servicing. Make the wiring connections using the wire connectors (AA) according to the diagram. Wrap the ground wire from the outlet box around the ground screw on the mounting bracket (DD) no less than 2 in. from the end of the wire.
Installation 5 Hanging the fixture D Attach the chain (E) to the screw collar loop (D). Raise the fixture up, and attach the chain (E) to the fixture loop (F). E F 6 Installing the threaded pipe B Screw the threaded pipe (D) into the coupling (C) located on the socket assembly (B). C D 7 HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
Installation 7 Preparing the shades Lower the outer shade (J) onto the Inner shade (P). so it rests comfortably on top. J P 8 Installing the bulbs and shades B Install three 60W max., medium base bulbs (not included) into the socket assembly (B). Screw one hex nut (CC), metal washer (O) and nylon washer (N) onto the threaded pipe (H). Pass the threaded pipe (H) through the outer shade (J) and inner shade (P).
Care and Cleaning When replacing bulbs, use 60W max., medium base bulbs. Always be certain that the electric current is turned off before cleaning this item. Use a soft, moist cloth with mild, non-abrasive soap to clean the fixture. Never use glass cleaner on fixture, as it will damage the metal finish. All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. Troubleshooting Problem Solution The fixture does not light.
Service Parts GND Inverted Pendant AA BB C M Part D N Description DD CC F E EE H A I O Part # Part Description Part # AA BB Wire Connector Short Machine Screw WC001 SCR832X050 E F Chain Fixture Loop CHAIN-MIZ FL89549 CC DD EE A Hex Nut Mounting Bracket Threaded Nipple Canopy NUT832 XBAR01 TN18200 C89549 Screw Collar Ring Screw Collar Loop SCG-MIZ SCL-MIZ Threaded Pipe Finial Decorative Cap Nylon Washer Metal Washer TP89549 F89549 DC89549 C D H I M N O 10 NW89549 MW895
Questions, problems, missing parts? Before returning to the store, call Hampton Bay customer service 8 a.m.-6 p.m., EST Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use.
