Installation Guide

ManualsBrandsHampton Bay ManualsOther5-Light Brushed Nickel White Shade Ceiling Chandelier

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Hampton Bay!

USE AND CARE GUIDE

5-LIGHT CHANDELIER

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

HAMPTONBAY.COM

1-877-527-0313

Item #000-000

Model #89544

Summary of content (10 pages)

PAGE 1
Item #000-000 Model #89544 USE AND CARE GUIDE 5-LIGHT CHANDELIER Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313 HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . .
PAGE 3
Pre-Installation Please read and understand this entire manual before attempting to assemble, operate, or install the product. NOTE: Before beginning assembly of this product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the product. TOOLS REQUIRED Claw hammer Safety goggles Phillips screwdriver Wire strippers Electrical tape Ladder Pliers HARDWARE INCLUDED GND NOTE: Hardware not shown to actual size .
PAGE 4
Pre-Installation (continued) PACKAGE CONTENTS A C D E F G H J L B K I Part Description A B Canopy Threaded Socket C D E F Screw Collar Ring Screw Collar Loop Chain Fixture Loop Quantity Part 1 G H Threaded Post Threaded Socket Ring 1 I J K L Arm Support Ring Glass Shade Support Ring Knob Arm 1 5 5 5 1 1 1 1 4 Description Quantity 5 5
PAGE 5
Installation 1 Installing the mounting bracket Orient the mounting bracket (DD) so that the raised center portion protrudes into the outlet box. Connect the mounting bracket (DD) to the outlet box with machine screws (BB). Screw the threaded nipple (EE) into the screw collar loop (D) a minimum of 1/4 in. Lock it in place with a hex nut (CC). Thread another hex nut (CC) to the center of the threaded nipple (EE), and screw the threaded nipple (EE) into the mounting bracket (DD).
PAGE 6
Installation 3 Making the electrical connections BARE COPPER, OR GREEN GROUND FIXTURE WIRE BARE COPPER, OR GREEN GROUND SUPPLY WIRE DANGER: Hazardous voltages cause severe injury or death. Disconnect all sources of power before servicing. Make the wiring connections using the wire connectors (AA) according to the diagram. Wrap the ground wire from the outlet box around the ground screw on the mounting bracket (DD) no less than 2 in. from the end of the wire.
PAGE 7
Installation 5 Hanging the fixture Attach the chain (E) to the screw collar loop (D). Raise the fixture up, and attach the chain (E) to the fixture loop (F). D E F 6 Installing the arm support ring Place the arm support ring (I) on the support ring knobs (K) located on the arms (L) of the fixture. L NOTE: Be sure the fixture arms are spaced evenly before installing the arm support ring. K I 7 HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
PAGE 8
Installation 7 Installing the bulbs and shades H J Lower the glass shade (J) over the threaded socket (B). Screw the threaded socket ring (H) onto the threaded socket (B). Repeat this process for the remaining fixture arms (L). Install five 100W max., medium base bulbs (not included) into the socket assemblies (B). B Care and Cleaning When replacing bulbs, use 100W max., medium base bulbs. Always be certain that the electric current is turned off before cleaning this item.
PAGE 9
Service Parts GND Chandelier AA BB C DD CC D F E EE H A I J Part Description Part # Part Description Part # AA BB Wire Connector Short Machine Screw WC001 SCR832X050 D E Screw Collar Loop Chain SCL-NI CHAIN-NI CC DD EE A Hex Nut Mounting Bracket Threaded Nipple Canopy NUT832 XBAR01 TN18200 C89544 F H I J Fixture Loop Threaded Socket Ring Arm Support Ring Glass Shade FL89544 LR009 ASR89544 GS89544 C Screw Collar Ring SCG-NI 9 HAMPTONBAY.
PAGE 10
Questions, problems, missing parts? Before returning to the store, call Hampton Bay customer service 8 a.m.-6 p.m., EST Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use.