Caution : You must read this before you proceed Corner Chair Label Picture Description QTY I Seat 1 J Backrest 2 K Seat Cushion 1 L Back Cushion 1 M Back Cushion 1 Noble House Home Furnishings LLC Page 1 OF 4
Label Picture Description QTY ① Bolt (M6*35mm) 9 ③ Washer 9 ④ Allen Key 1 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 4
Back Cushion (M) Back Cushion(L) Seat Cushion(K) Backrest(J) Backrest(J) Seat (I) This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Place the Seat Cushion(K) and the Back Cushion (M&L) on the Corner Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Caution : You must read this before you proceed Right Side Chair Label Picture Description QTY F Seat 1 G Backrest 1 H Armrest 1 D Seat Cushion 1 E Seat Board 2 Noble House Home Furnishings LLC Page 1 OF 6
Label Picture Description QTY ① Bolt (M6*35mm) 7 ② Bolt (M6*15mm) 3 ③ Washer 9 ④ Allen Key 1 ⑤ PE Cap 3 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 6
Back Cushion(E) Seat Cushion(D) Backrest(G) Seat (F) Armrest(H) This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Turn down the Armrest and Seat Attach Seat (F) to Backrest (G) using Bolts(①) and Washers(③) with Allen Key(④) as shown above. Attach Armrest (A) to Backrest(B) using Bolts(②) and Washers(③) with Allen Key(④) as show Fully tighten the Bolts. Step 3 Put the PE Cap on the Bolt,as the above picture show.
Step 4 Place the Chair on a LEVEL SURFACE to check for wobbles.Check stability Step 6 Place the Seat Cushion(D) and Back Cushion (E) on the Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 6 OF 6
Caution : You must read this before you proceed Coffee Table Label Description QTY N Table Top 1 P Leg 2 Description QTY ① Bolt (M6*35mm) 13 ③ Washer 13 ④ Allen Key 1 Label Picture Picture Noble House Home Furnishings LLC Page 1 OF 4
Before Beginning Assembly: Table Top(N) Leg (P) Leg (P) This Coffee Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Attach Table Leg(P) to Table Top (N) using Bolts(①) and Washers(③) with Allen Key(④). Fully tighten the Bolts. Step 2 Place the Coffee Table on a LEVEL SURFACE to check for wobbles.
Noble House Home Furnishings LLC Page 4 OF 4
Caution : You must read this before you proceed Left Side Chair Label Picture Description QTY A Seat 1 B Backrest 1 C Armrest 1 D Seat Cushion 1 E Back Cushion 2 Noble House Home Furnishings LLC Page 1 OF 6
Label Picture Description QTY ① Bolt (M6*35mm) 7 ② Bolt (M6*15mm) 3 ③ Washer 9 ④ Allen Key 1 ⑤ PE Cap 3 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 6
Back Cushion(E) Seat Cushion(D) Backrest(B) Seat (A) Armrest(C) This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Turn down the Armrest and Seat Attach Seat (C) to Backrest (B)using Bolts(①) and Washers(③) with Allen Key(④) as shown above. Attach Armrest (A) to Backrest(B) using Bolts(②) and Washers(③) with Allen Key(④) as show Fully tighten the Bolts. Step 3 Put the PE Cap on the Bolt,as the above picture show.
Step 4 Place the Chair on a LEVEL SURFACE to check for wobbles. Step 6 Place the Seat Cushion(D) and Back Cushion(E) on the Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 6 OF 6
