Instructions / Assembly

5
RE-LAMPING STRING LIGHTS
Care and Maintenance
WARNING: RISK OF ELECTRIC SHOCK!
Disconnect power at the source prior to re-lamping the string lights. For outdoor
string lights, DO NOT re-lamp light strings during rain or when wet.
□ Re-lamp string lights only during dry and calm weather conditions.
□ Unscrew existing lamps by lightly holding the socket in one hand and twisting the lamp counterclockwise. Lamps may be tight in
the sockets. This is normal to prevent moisture from getting into the socket.
□ Replace with medium base lamps. Screw bulbs into the sockets clockwise until the top of sockets form a tight seal around the
bulbs and the bulbs make contact with the sockets. Do not exceed 420 watts (LED) or 1200 watts (incandescent) all sets combined.
Suitable for Incandescent, CFL or LED lamps.
MAINTENANCE
Periodically clean the string light, check connections and ensure no additional weight has been added.
TROUBLESHOOTING
The lights will not turn on.
The fuse blows, or
the circuit breaker
trips, when the light is
turned on.
The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
There is a faulty wire connection. Check the wiring.
The bulb is not making contact with
the terminal.
There are crossed wires, or the power
wire is grounding out.
The receptacle circuit is overloaded.
Check the position of the terminal
inside the socket.
Discontinue use of the light string. Contact
a qualified electrician or call the Customer
Care Services Team.
Connect to a different receptacle circuit.
Problem Possible Causes Solution