Instructions / Assembly

Assembly - Attaching the Light Kit

Attaching the light kit

□ Remove one screw (N) from the black bracket below the

fan-motor assembly (E). Loosen, but do not remove the

other two screws.

□ Connect the blue wire exiting the bottom of the fan-motor

assembly (E) with the black wire from the top of the light

kit tter assembly (F).

□ Connect the white wire exiting the bottom of the fan-motor

assembly (E) with the white wire from the top of the light

kit tter assembly (F).

□ Attach the light kit tter (F) to the fan-motor assembly (E)

by securing them with the two screws (N) loosened in the

rst step. Push the light kit tter assembly (F) up to engage

the screw heads in the screw slots and turn to secure.

Tighten each screw rmly.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light kit.

Assembly - Attaching the Fan Blades

Attaching the fan blades Attaching the blade assemblies

12 13

□ Attach the blade (G) to the blade bracket (H) and the blade

medallion (I) using the blade attachment screws (AA). Start

a blade attachment screw (AA) into the blade bracket (H).

Repeat for the two remaining blade attachment screws (AA).

□ Tighten each blade attachment screw (AA) securely.

□ Attach the blade assembly to the fan-motor assembly (E) by

rst inserting the blade assembly into the slot in the side of

the fan-motor assembly (E).

□ Insert a blade bracket screw with lockwasher (BB) into the

blade bracket (H). Repeat for the one remaining screw.

□ Tighten each blade bracket screw with lockwasher (BB)

securely.

□ Repeat these steps for the remaining blades (G).

NOTE: Your fan blades are reversible. Select the blade

side nish which best accentuates your decor.