® Item #XXX XXX Model #91126 UL model #46-UM USE AND CARE GUIDE UMBER 46-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A F B G C H D I E J Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C Part Description Quantity F Blade bracket 5 G Blade 5 1 H Light kit fitter assembly 1 Canopy with canopy ring attached 1 I Glass shade 1 D Coupler cover 1 J LED bulb, 9.5-watts maximum 2 E Fan motor assembly 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35lbs. (15.9kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the canopy ring (K) from the canopy (C) by □□ □□ Routing the wires □□ Route the wires exiting the top of the fan motor (E) into the decorative motor collar cover (D) and through the canopy ring (K). turning the ring counterclockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (II) located in the “L” shaped slots.
Assembly - Close-To-Ceiling Mount 1 2 Close-to-Ceiling Mounting □□ Remove the canopy ring (K) from the canopy (C) by turning □□ □□ □□ Routing the wires □□ Remove three of the six screws and lock washers (every other the ring counterclockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (II) located in the “L” shaped slots. Remove and save the two canopy screws (JJ) in the round holes. This will enable you to remove the mounting bracket (A).
Assembly - Hanging the Fan (continued) 5 Hanging the fan A WARNING: The hook as shown is only to balance the fan while attaching wiring. Failure to hang as shown may result in hook breaking, causing the fan to fall. The hook must pass from inside to the outside of the canopy. A B C C E □□ Carefully lift the fan motor assembly (E) up to the mounting bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly E (B) in the mounting bracket socket.
Assembly - Hanging the Fan (continued) 7 Wrapping the extra wire NOTE: Follow this step ONLY if you did not cut the extra length from the wires coming from the ceiling fan. □□ Gently wrap the excess wire around the mounting □□ 8 bracket. Secure the wires with electrical tape. Mounting the fan Close-to-Ceiling mounting WARNING: The locking slots of ceiling canopy are provided only as an aid to mounting.
Assembly - Attaching the Fan Blades 9 Attaching the blades to the blade bracket AA □□ Attach a blade (G) to a blade bracket (H) using the □□ G screws (AA) provided. Please note that the rubber washers are pre-attached to the blade bracket (H). Insert a screw into the blade bracket (H). Repeat for the two remaining screws (AA). Tighten each screw securely.
Assembly - Attaching the Light Kit (continued) 12 Attaching the glass shades and bulbs CAUTION: Make sure the power is off before attaching or removing the glass shades. H WARNING: Allow the glass shade to cool completely before removing. J □□ With power off, install the two LED bulbs (J)(Max. 9.5W included) by screwing into the light sockets.
Operation Turn on the power and check the operation of the fan. The pull chain controls the fan speeds as follows: 1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off The appropriate speed settings for warm or cool weather depends on factors such as the room size, ceiling height, and number of fans. The slide switch controls the direction of the blades: forward (switch down) or reverse (switch up) YY NOTE: Wait for the fan to stop before reversing the direction of blade rotation.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
® Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
