Instructions / Assembly

Installation

□ Attach the mounting unit (AA) to the junction box (not

included) with the mounting screws (BB) and remove the

pre-installed screw collar ring.

□ Place the canopy (B) over the pre-installed screw collar

loop on the mounting unit (AA). Turn the screw collar ring

until 1/2 of the screw collar loop threads are exposed.

□ Secure the chain (C) to the screw collar loop on the

Lower the screw collar ring and canopy (B) over the chain

(C).

□ Weave the electrical wires, ground wires through the chain

(C),canopy (B) and the center of the mounting unit (AA).

NOTE: Ensure the quick connector is fully closed when

installing the chain.

Making the electrical connections

□

mounting unit (AA) by securing it with the preinstalled

ground screw.

□ Connect the black to black (power), the white to white

(neutral) and copper wire to ground wire with the wire

NOTE:

color,attach the smooth wire with H markings or letters

to the black (positive) wire and the ribbed wire with N

markings or letters to the white (neutral) wire.

Securing the light ﬁxture

□ Secure the canopy (D) to the mounting unit (AA) with the

screw collar ring.

Installing the light bulb

□ Install one E26 100-watt bulb (not included).

Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM