Installation Guide

6
Bluetooth
®
Audio PlayBluetooth
®
Pairing
□ Pull the chain switch of the light kit to ensure the light kit is
powered up. The Bluetooth
®
function turns on automatically.
□ On your Bluetooth
®
device, search for a new Bluetooth
®
device called “Audio Light ****” under the list of devices
available. Please note that **** is a number that corresponds
to your specic audio light kit.
□ If you are asked for a password, enter ‘1234’. Pairing is
successful when you hear a short conrmation tone from
the audio light kit.
□ Start streaming audio from your music source.
□ When the audio light kit is turned on, it will automatically
search for the last device it was connected to if the device
is within the efcient range. Most of the Bluetooth
®
audio
sources support this function, but some of them might not.
In this case, you must manually set up the connection again.
If the previous Bluetooth
®
device is not available, the audio
light kit will search for new devices.
□ For some Bluetooth
®
devices and mobile phones, ‘Stereo
Speaker’ mode should be enabled to stream audio
wirelessly.
□ The audio light kit is compatible with the 3.0+EDR protocol.
Full Bluetooth
®
functionality and volume control cannot
be guaranteed if the audio source has an older Bluetooth
protocol.
□ To pair to a new Bluetooth
®
device, you need to disable the
current paired device. Open searching function of the new
Bluetooth
®
device and repeat the pairing steps as previously
mentioned.
21
Operation
NOTE: The ceiling fan audio light kit with Bluetooth
®
Technology is compatible with iPhone, iPad, Android,
Blackberry, or similar devices whose Bluetooth
protocol is compatible with 3.0+EDR protocol. To
pair, ensure the light kit is powered up.
□ Once paired, you will be able to control the playback and
volume through your device.
□ If available on your device, access the sound settings or
equalizer settings. Selecting the correct audio prole or
sometimes turning on the equalizer will improve the quality
and maximum volume of the playback.
□ If you wander out of range of the Bluetooth
®
device, simply
move closer to the audio light kit. No pairing actions will be
needed if the lost connection; the devices will regain the lost
connection automatically.
□ The ceiling fan audio light kit with Bluetooth
®
Technology
features a built-in privacy mode which disconnects speaker
playback when a phone call is being received from the
device. It will automatically resume playback when the call
is completed.