Instructions / Assembly

No tools required for assembly and installation.
FOR FIRST TIME USE : Remove pull tab
between the top cover (1) and housing (5).
(Fig.1)
ASSEMBLY AND INSTALLATION INSTRUCTIONS:
Fig.3
Fig.2
Fig.1
CHARGING THE BATTERY:
For optimum performance, it is best to install the solar lights in full sunlight and charge
for 10-12 hours. Allow the light to run at least 8-12 entire charging and discharging
cycles to reach battery’s maximum capacity.
Page 4
B. Firmly twist shepherd’s hook (7) into solar
housing. Attach the shepherd’s hook (7) and
post (8) to stake (9). Push the assembly firmly
into the ground- DO NOT use a hammer. For
ground with hard soil, to prevent breaking the
stake (9), use trowel to loosen soil first. (Fig.3)
6
5
9
7
8
9
5
１
5
A. Firmly slide post (6) into solar housing (5).
Attach the post (6) to stake (9). Push the
assembly firmly into the ground - DO NOT
use a hammer. For ground with hard soil, to
prevent breaking the stake (9), use trowel to
loosen soil first. (Fig.2)