INSTRUCTION MANUAL 1 Light Pendant Lara Home Depot SKU 529-549 (UPC 718212271315) (Bronze fixture) LA-2018E/S/F Page 1
Thank you for purchasing this Hampton Bay interior light fixture. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. Traditional 1 Light Pendant Lamp in Bronze Finish. 2. Timeless Elegant Design. 3. Easy to assemble and install. QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
CAUTION: 1. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. 2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. 3. If you have any non-electrical questions about this fixture, please contact our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your SKU (529-549 Bronze fixture) or UPC (718212271315 Bronze fixture). 4.
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale): 1 Screw shell(#7) 4 Rod(#3) 1 Canopy (#2) 1 Glass Shade(#6) 4 Glass panel B (#10) 4 Glass panel A (#8) 4 Screw(#5) ASSEMBLY INSTRUCTIONS: 1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture 2. 3. 4. 5. 6. 7. and all mounting hardware from outlet box. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care not to lose any small parts necessary for installation.
ASSEMBLY: 1. Mounting Screw 2. Canopy 3. Rod 4. Metal Frame A 5. Screw 6. Glass Shade 7. Screw Shell 8. Glass Panel A 9. Metal Frame B 10.
PARTS INCLUDED FOR INSTALLATION (parts are not to scale): 3 Mounting Screw (#1) 3 Wire Connector (#14) 1 Ground Screw (#12) 2 Outlet Box Screw (#16) 1 Mounting Plate (#13) INSTALLATION INSTRUCTIONS: 1. Attach the Mounting Plate (#13) to the outlet box in the ceiling with two outlet box Screws (#16). The side of the Mounting Plate marked “GND” must face out. 2.
INSTALLATION: 15. Outlet Box 14. Wire Connector Ground Wire Black Wire White Wire 13.Mounting Plate 12.Ground Screw 16. Outlet Box Screws 1.Mounting Screw 2.
TROUBLESHOOTING: Bulb will not light. Fuse blows or circuit breaker trips when light is turned on. Possible Cause 1. Bulb is burned out. 2. Power is off. Corrective Action 1. Replace light bulb. 2. Make sure power supply is on. 3. Faulty wire connection. 3. Check wiring. 4. Faulty switch. 4. Test or replace switch. Crossed wires or power wire Check wire connections. is grounding out. PRODUCT MAINTENANCE: 1.
