Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 Screws (#1) 2 Cap Nuts (#3)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary
remove old fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area,
Take care not to lose any small parts necessary for installation.
3. Unscrew the 2 pieces of Screws (#1) and take off the Lamp Body (#7).
4. Install light bulbs in accordance with the fixtures specifications. (DO
NOT EXCEED THE MAXIMUM WATTAGE RATING!!)
5. Reassemble the Lamp Body(#7) back to the Fixture Frame (#4) and
secure by the 2 pieces of Screws (#1).