Installation Guide

ManualsBrandsHampton Bay ManualsOtherLarkin Street Post Mount 1-Light Vintage Rust Outdoor Lantern

INSTALLATION INSTRUCTIONS

For Post Lantern

Model # 23005

W ARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 2

Shut off power at the circuit breaker and remove

old fixture including mounting hardware.

Carefully unpack your new fixture and lay out all

the parts on a clear area. Take care not to misplace

any small parts necessary for installation.

Removing the top cover by unscrewing two studs

<A> (Fig 3

), and then unfixed the glass clasp,

after open the glass package softly, insert the

glass panel <B>

carefully into the cage

downwards in proper sequence then fixed them

by glass clasp <H> (Fig 4, 5). Make sure all glass

panel is secures well, at last asse

mble the top

cover to the cage using the two studs <A>.

4. Pull black, white and ground wires out of post.

Next, connect electrical wires while supporting the

bottom assembly. If your outlet has a ground wire

(green or bare copper), connect the fixture grou

wire to it. If not, consult your electrician for proper

grounding. After wires are connected, tuck them

carefully inside the post. Align bottom assembly

with post and secure with thumb screws. (Fig.1&2)

6. At this point remove studs, then lift the top cov

er to

install the desired light bulbs.

NOTE:

Install the light bulbs in accordance with the

fixtures specification.

DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!

Your installation is now complete. Return power to

the junction box and test fixture.

FOR SUPPLY

CONNECTIONS. USE WIRE RATED FOR AT

LEAST 90℃

In the event that you should have any

nstallation question or are missing parts, please

contact Customer Service. Customer service

may be reached weekdays a 1-877-527-0313

between the hours of 8:00am and 5:00pm PST

(Pacific Standard Time).

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

Fig.1

Fig.3

FIG.2

FIG.3

TOP VIEW

Fig.4

Fig.5

Top View

FIG.1

Fig.3

2455 PACES FERRY RD.,N.W.,ATLANTA. GA 30339

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS For Post Lantern Model # 23005 W ARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. s 1. Shut off power at the circuit breaker and remove Fig.1 old fixture including mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to misplace any small parts necessary for installation. 3.
PAGE 2
INSTRUCCIONES PARA LA INSTALACION Para Cartel Linterna Modelo # 23005 iADVERTENCIA! CORTE LA ENERGIA ELECTRICA EN LOS FUSIBLES O EN EL CIRCUITO PRINCIPAL. Corte la energla electrica en el circuito principal y saque s 1. la lampara vieja, incluyendo todo el mantaje. FIG.1 2. Desempaque cuidadosamente la nueva lampara y ponga todas las partes en un area despejada. Tome cuidado de no perder ninguna parte pequena que sea necesaria para la instalacion. 3.