Instructions / Assembly

Installation (continued)

Connecting The Ground Wire

DANGER: Be sure electrical power is switched off when

installing the xture.

□ With the power turned off, hold the xture rmly and

connect the ground wire from the xture to the bare copper

or green ground wire from your junction box using a wire

nut (EE).

NOTE: If house wiring does not include a ground wire,

consult your local electrical code for approved grounding

methods.

□ Use wire nuts (EE) to connect the black xture wire to the

black power supply wire and the white xture wire to the

white power supply wire.

□ Tuck wires into the junction box.

Connecting The Fixture To

Mounting Plate

NOTE: Make sure all wire nuts are secured to the wire and

wrap each wire with a 2 in. piece of black electrical tape.

□ Position the xture body over the junction box and secure

with mounting screw (CC).

Adding the Shades and Bulbs

□ Once the xture is securely in place, insert G9 bulbs (FF) in

each bulb socket.

□ Use the glass tting ring (HH) to attach the glass shades (B)

using the provided tool (GG).

Turning On The Electricity

□ Turn on electricity at the fuse or circuit breaker box and

verify success of installation.

ground

black

white