Instructions / Assembly

4
Assembly
1
Connecting the lower tube to the
base
2
Connecting the remaining tubes
Ƒ Pull the excess power cord (I) through the base (H).
Ƒ Tighten the lower tube (G) onto the base (H).
NOTE: Do not twist the power cord (I).
Ƒ Pull the excess power cord (I) through the base (H).
Ƒ Tighten the middle tube (F) onto the lower tube (G).
Ƒ Tight
en the upper tube (E) onto the middle tube (F).
NOTE: Do not twist the power cord (I).