Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
5 Glass Shade (#7) 5 Top Arm (#6) 5 Screw Shell (#8)
ASSEMBLY INSTRUCTIONS:
1. Shut o ff power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Adjust the Arms (#4) to the proper position.
4. Attach the Center Column Upper/Middle/Lower (#10, #11, #12) and Top Housing (#2)
to the top of Light Cluster Assembly (#3), secure Fixture Loop (#1) to nipple on top
of the Top Housing (#2), pull the fixture wires until taut.
5. Assemble the Decorative Top Arm (#6) to the Top Housing (#2) and Bottom Arm(#4),
and fasten the Top Arm (#6) with Short Knurled Ball Nut (#26) on the upper side and
Long Knurled Ball Nut (#5) on the lower side.
6. Place the Shade (#7) over the Socket, fasten with Screw shell (#8) by using the
included Spanner (#9).
5 Long
Knurled Ball Nut (#5)
1 Spanner (#9)
Bottom
5 Short
Knurled Ball Nut (#26)