Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
3 Glass Shade (#6) 3 Screw Shell (#7)
ASSEMBLY INSTRUCTIONS:
1. Shut o ff power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Adjust the Arms (#3) to the proper position.
4. Secure the Arm (#3) to the Fixture Body (#2) and tightened by Knurled Ball Nut (#5).
5. Secure Fixture Loop (#1) to nipple on top of Fixtue Body (#2), pull the fixture wires
until taut.
6. Place the Shade (#6) over the Socket, fasten with Screw shell (#7) by using the
included Spanner (#8).
3 Knurled Ball Nut (#5)
1 Spanner (#8)