Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Glass Shade (#6) 4 Rod (#3) 1 Screw Shell (#7)
1 Canopy (#1) 1 Spanner (#8)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Determine length desired and thread Rods (#3) to Canopy (#1) and Nipple (#4).
4. Install Glass Shade (#6) over Socket (#5) and secure with Screw Shell (#7) using the
Spanner (#8).