Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Poly Assembly (#1) 5 Glass Shade (#6) 1 Nipple (#3) 5 Screw Shell (#7)
1 Poly Decoration (#4) 1 Finial (#5)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Adjust the Arms (#2) to the proper position as shown.
4. Attach the upper Poly assembly (#1) to top of Light Cluster Assembly (#9), pull the
wires from top loop until taut.
5. Thread Nipple (#3) into the coupling on the bottom of Light Cluster Assembly (#9).
6. Slide Decoration (#4) upwards over Nipple (#3) and secure with Finial (#5).
7. Place the Shade (#6) over the Socket. Fasten with Screw shell (#7) by using the
included Spanner (#8).