Installation Guide

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation

Preparing for installation

Attaching the canopy to the outlet

box

ƶ Fasten the mounting bracket (AA) onto the outlet box using

two outlet box screws (BB).

ƶ Screw the threaded tube (II) into the mounting bracket (AA),

and secure it using the lock washer (HH) and hex nut (FF).

NOTE: This threaded tube (II) should extend long

enough to protrude through the canopy when it is

mounted. (Adjust as needed).

ƶ Place the canopy (A) over the threaded tube (II), and screw the

screw collar loop (EE) onto the threaded tube (II).

ƶ Secure the canopy (A) using the ring (DD).

Assembling the xture body

Attaching the chain

ƶ Guide the xture wire with bare copper ground wire

through the loop (C), and screw the loop (C) onto the bushing

on the

xture body (D) securely.

ƶ Adjust the three arms on the

xture body (D) to make an equal

distance between them.

NOTE: Do not twist the xture wire.

ƶ Adjust the chain (B) to the desired height by spreading apart

the end link of the chain (B). Use a pair of pliers and a

screwdriver. Wrap a soft cloth around the pliers to protect the

chain’s

nish.

ƶ Attach one end of the chain (B) to the screw collar loop (EE)

and the other end to the loop (C).