Instructions / Assembly

7 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation (continued)

Attaching the canopy to the outlet

box

Installing the threaded pipe

□ Place the canopy assembly (B) over the outlet box, and

ensure the heads of the support screws (AA) (long) come

through the holes of the canopy assembly (B).

□ Tighten the cap nuts (FF) onto the protruding support

screws (AA) on the mounting bracket (A) until the fixture

body is held firmly against the ceiling.

□ Screw the threaded pipe (C) into the bushing located on the

canopy assembly (B).

Installing the light bulbs

Installing the glass shade

□ Install two light bulbs (not included) into the sockets on the

canopy assembly (B). Use two 60-watt medium base bulbs

or less.

NOTE: You can also use two 13W maximum, SBCFL bulbs

(sold separately). Do not exceed the recommended wattage.

□ Slide the metal washer (GG), plastic washer (HH), glass

shade (D), plastic washer (HH), and metal washer (GG) over

the threaded pipe (C), and secure with the G3/8 in. hex nut

(II), as shown (Do not tighten excessively). Then place the

cap (E) over the threaded pipe (C), and secure with the finial

(JJ).