Installation Guide

3 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

PLANNING INSTALLATION

Read all instructions before installation.

To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any

cuts, abrasions, or exposed copper that may have

occurred during shipping. If there is a defect in the

wire, do not attempt installation. Please call the

Customer Service Team at 1-877-527-0313.

TOOLS REQUIRED

Phillips Wire Pliers

Screwdriver Stripper

Safety Electrical

Goggles Tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB

CC DD EE FF

GG HH II JJ

KK LL MM NN

Part Description Quantity

AA Mounting bracket 1

HH Lock washer 1

BB Outlet box screw 2

II Threaded tube (G 1/2 in.) 1

CC Green ground screw 1

JJ Knob nut 6

DD Ring 1

KK Plastic washer 2

EE Screw collar loop 1

LL Metal washer 2

FF Hex nut (G 1/2 in.) 1

MM Hex nut (G 3/8 in.) 1

GG Wire connector 3

NN Threaded tube (G 3/8 in) 1

NOTE: You may use three 60W type A bulbs or 13W

self-ballasted fluorescent bulbs (sold separately).