Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 Glass Shade (#2) 2 Metal Ring (#3) 2 Screw Shell (#4)
2 Pine Cone (#6) 2 Metal Leaf (#7)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box. If necessary, remove old fixture
and all mounting hardware from wall outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care
not to lose any small parts necessary for installation.
3. Place the Glass Shade (#2) and Metal Ring (#3) onto the Socket (#8) and secure
them with Screw Shell (#4).
4. Secure the Pine Cone (#6) and Metal Leaf (#7) to the metal stick on the Fixture body
and put them in proper location as shown.