Instructions / Assembly

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Preparing for the mounting
bracket
2
Installing the mounting bracket
□ Tighten the support screws (AA) into the inside mounting
hole of the mounting bracket (A) (to be fully tightened
later), and secure with hex nuts (G5/32 in.) (DD).
NOTE: The support screws (AA) should extend long enough
to protrude through the canopy (B) when it is mounted. (Adjust
as needed)
□ Fasten the mounting bracket (A) onto the outlet box using
two outlet box screws (CC).
3
Assembling the fixture body
□ Adjust the arms on the fixture body (F) so that they are in a
line and fasten the arms to the center column using the
decorative screws (E).
□ Pull the fixture wires through each tube and canopy assembly
(B), then tighten tubes and canopy assembly (B) until secured
respectively as shown (There are 5 height options for you to
chose from.)
CC
A
AA
A
DD
OPTION 2OPTION 1
OPTION 5
OPTION4
OPTION 3