Instructions / Assembly

7 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installing the canopy to the outlet

box

Installing the glass shade and light

bulbs

□ Raise the canopy (A) all the way up to the ceiling, and tighten

the ring (DD) onto the screw collar loop (EE) until the canopy

(A) is firmly held against the ceiling.

□ Install the light bulbs (not included) into the sockets. Use

three 60-watt medium base bulbs.

□ Fasten the threaded tube (G3/8 in) (OO) onto the bushing of

the fixture body (D) and secure with the hex nut (G3/8 in) (NN).

□ Place the pipe (JJ), pipe lid (KK) over the threaded tube (G3/8

in) (OO), and secure them with the hex nut (G3/8 in) (NN).

□ Place the metal washer (MM), plastic washer (LL), glass

shade (G), plastic washer (LL), and metal washer (MM) over

the threaded tube (G3/8 in) (OO), and secure them with the

hex nut (G3/8 in) (NN). (Do not tighten.)

□ Place the cap (H) over the threaded tube (G3/8 in) (OO), and

secure it with the finial (I).

NOTE: You can also use three 13w maximum SBCFL

bulbs (sold separately). Do not exceed the recommended

wattage.

Installation (continued)