Instructions / Assembly

Weaving the fixture wire

□ Unscrew the ring (DD) from the screw collar loop (EE), and

lower the canopy (A) and ring (DD) over the chain (B) on the

fixture.

□ Weave the fixture wires and bare copper ground wire up

through the chain (B), ring (DD), canopy (A), screw collar loop

(EE), threaded tube (II), and then into the outlet box.

Making the electrical connections

□ Strip 3/4 in. of insulation from the wire ends, and twist the

stripped ends together with pliers.

□ Connect the glossy/live wire from the fixture to the black

wire from the outlet box, and the rough/neutral wire from the

fixture to the white wire from the outlet box.

□ The bare copper grounding wire from the fixture must loop

one turn under the head of the green ground screw (CC) on

the mounting bracket (AA) before it is connected to the

grounding conductor of the supply circuit.

□ Cover the wires with wire connectors (GG). Tape the wire

connectors (GG) and wires together, and carefully position all

wires inside the outlet box.

NOTE: The glossy/live wire has the text printed on it;

the rough/neutral wire has the ridge on it.

Installation (continued)