Instructions / Assembly

6
ASSEMBLY AND INSTALLATION INSTRUCTIONS:
1. Shut down the main electrical supply from the fuse box or circuit breaker in your house or building.
2. Fasten the mounting bracket onto the outlet box using 2 outlet box screws.
3. Connect the wire from the fixture to the power supply wire from outlet box. Cover with wire
connectors.
A. Twist together white wire from the fixture with white wire from outlet box. Cover with wire
connector.
B. Twist together black wire from the fixture with black wire from outlet box. Cover with wire
connector.
C. The bare copper grounding wire from the fixture must loop one turn under the head of green
screw on mounting strip before it is connected to the grounding conductor of the supply
circuit.
4. Carefully position all wiring inside outlet box, then install the fixture body onto the mounting
bracket by fastening with set screw as show.
5. Place the shade onto the socket.
6. Install the bulb (not included). Use 60-watt Maximum
Candelabra base type A bulbs or MAX 13W
UL LISTED CFL bulb.
7. Turn on the electrical power in your house or building to activate the wall sconce light.