Installation Guide

a. Blade attachment hardware
(15 screws and lockwashers)
b. Mounting & Electrical Hardware
(1 bolt, 1 clevis pin, 3 plastic wire
connectors)
c. Blade Balancing Kit
d. Extra Blade Bracket Attachment
Hardware
(1 screw and lockwasher)
8. Glass Bottom Cover
9. Blade Bracket with Captive Screws (5)
10. Blade Bracket Support Plates (5)
11. Finial and Threaded Tube
12. Bulbs (2)
13. Hand Unit/Receiver
14. Glass Shade
1. Slide-On Mounting Plate (inside Canopy)
2. Downrod and Ball Assembly
3. Fan Motor Assembly
4. Canopy
5. Decorative Downrod Frame
6. Decorative Motor Collar Cover
7. Blades (5)
2. Unpacking Your Fan
IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED BY
ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436; 5,988,580;
5,971,573; 6,010,110; 6,010,306; 6,039,541; 6,046,416 AND OTHER
PATENTS PENDING.
Unpack your fan and check the contents. You should have the following items:
PLEASE REMOVE FOAM PIECES AND CARDBOARDS
ON THE BOTTOM OF THE FAN BEFORE INSTALLING
BLADES OR TESTING MOTOR.