Instructions / Assembly

Assembly (continued)
8
□
Place the legs (B) and top frame (A) on a soft, flat
non-abrasive surface
Attach the legs (B) to top frame (A) using the M6*15
Hex bolts (AA), M6*35 Hex bolts (BB) and washers (CC).
□
4
Attaching The Legs
Attaching The Support Bar
□
□
support bar (B) to the table top (A) using M6*15
Hex bolts (AA) and washers (CC).
Please ensure all the botls are assembled correctly.
Tighten all the hex bolts (AA) with the socket wrench (EE).
Attach all the hex bolt caps (DD).
Attaching The Cushion
6
5
AA
CC
DD
BB
CC
DD
IM PORTANT: Do not fully tighten the bolts, only hand
tighten until assembly is complete.
DD
AA
CC
A
B
B
C
□
□
Turn the table over and set it down on its legs.
Put the cushion onto the bench.
□
Repeat step 4~6 for the left three bench.