Instructions / Assembly

1-855-HD-HAMPTON

Install the two 60-watt candelabra bulbs (H) into the sockets

on the light kit (F).

Insert the center hole of the glass shade (G) through the

threaded rod on the light kit (F) while inserting the pull

chains from the switch housing into the side holes of the

glass shade (G). Ensure the side holes of the shade (G) are

directly below the 3-speed switch and light switch on the

switch housing.

Reinstall the rubber washer (QQ), flat washer (PP) and

hexagon nut (OO). Ensure the hexagon nut (OO) is securely

tightened to hold the glass shade (G) in place.

Thread the two pull chains attached to the fan through the

two holes on the cover plate (NN) and fasten it onto the

threaded rod with the finial nut (MM).

Attach the two pull chains with fobs (KK) to the pull chains

from the fan.

Restore power. The fan is now ready for operation.