User Manual


Owner’s Manual
6
HOOK UP
CU-1
HEAD
PHONES
CU
-
1
TO KEYBO ARD PEDAL
H-BUS
Upstream Downstream
HOOK UP WITH XK-5, XLK-5, XPK-250W, CU-1, ST-XLK5W
 Connect the  cables as shown in the diagram above.
 IMPORTANT:  e  interface provides for DC power as well as system
communication, therefore it is not necessary to utilize the “DC IN” jack on the
Expression Pedal when connecting to the XK-5.
 In addition, no special con guration is required. Each device is con gured auto-
matically.
NOTE: The above diagram shows only the connections for the Pedalboard and Expression
Pedal. For information on other connections such as AC power, audio, Leslie, etc.
Please consult the XK-5 Owner’s Manual.
 is keyboard uses Hammond’s new  interface which
will supply both DC power and data transfer using a single
connection.
IMPORTANT: Use the  cable provided with this
instrument for all  connections. DO NOT use a
4-pin XLR or other type of connector. Doing so may result in
damage to the instrument.