User Manual

5

取扱説明書
5
Remove the side panels of the XK-5 Keyboard
as shown above.
7
Carefully place the XK-5 on the XLK-5 as shown above.
Remove the protective sheets.
8
Fix the XK-5 and XLK-5 by using attached 4
knob bolts.
Use the four Knob Bolts (part 󱀔 on page 3) to
secure both the XK-5 and the XLK-5.
4
Carefully place the XK-5 Keyboard
on a towel or other soft surface to
avoid damage, then remove the 6
screws (for rear, “B” 2 - M4 x 16, for
bottom, “A” 4 - ø4 x 10) shown on the
left using a #2 Phillips screwdriver.
Insert the hole caps into the two holes on
the rear panel.
6
Attach the protective
sheets inside the side panels of
the XLK-5.
Fold with stickers
are bottom side.