User Manual


Owner’s Manual
4
ASSEMBLY PROCEDURE
 Do this assembly carefully to avoid injury to hands or feet.
 Disconnect the power cable before this procedure.
1
Assemble the keyboard stand (ex. ST-XLK5W).
2
Carefully place the XLK-5 on the stand as shown.
3
Connect the two  cables and the CU-1 cable as shown above. Use the clamps inside the panels
to secure the cables.
DO THIS FIRST:
If you are using the XLK-5 Keyboard with the
ST-XLK3 stand, attach the rubber feet using the tap-
ping screws (parts 󱀕 and 󱀖 on page 3) as shown on the
left. Use a #2 Phillips screwdriver.
Using with ST-XLK3