User Manual

Getting Ready To Play

ADD EFFECTS TO THE ORGAN SECTION

VIBRATO & CHORUS

Adding a richness to the sound by changing pitch slightly with periodically.

[UPPER], [LOWER] buttons

Switches the Vibrato & Chorus e ect ON/OFF. When “ON” the light illuminates.

NOTE: You can adjust the Vibrato & Chorus e ect to your liking. (P. 81)

For this example, switch ON the [UPPER] button.

LESLIE

 e LESLIE e ect is the famous “Moving and Swirling” sound provided by rotating

horns and speakers, but executed here in the Digital realm.

[FAST] button

 is button toggles the mode of the Rotor to fast or not. When the light is “ON”, it

is FAST, and when “OFF”, not.

[STOP] button

 is button sets the mode when the [FAST] button is o . When the light is “ON”, it

is STOP, and when “OFF”, it is SLOW.

[BYPASS] button

To engage the Leslie e ect, press the [BYPASS] button turning the light “OFF”.

NOTE: These controls perform the same functions when a Physical Leslie is connected via the

11 pin socket.

NOTE: You can  ne-tune the parameters of the Digital Leslie e ect etc. (P. 82)

For this example, let’s set the status of all lights “OFF”.

OVERDRIVE

 e Overdrive section adds warmth at low settings, and “grit” or distortion at higher.

[ON] button

Toggles the Overdrive “OFF” and “ON” (when on the light is illuminated).

[AMOUNT] knob

Adjusts the amount of Overdrive.  e amount increases as you rotate the knob clock-

wise.

In this example, the Overdrive is not used.  e Button light should be “OFF”.

MULTI-EFFECTS

Adjusts the amount of the selected Multi-e ect to be applied to the Organ section.

 e default settings: at “Tremolo”.

[ON] button

Toggles the Multi-E ects “OFF” and “ON” (when on the light is illuminated).

[AMOUNT] knob

Adjusts the amount of Multi-E ect to be applied.  e amount increases as you rotate

the knob clockwise.

In this example, the Multi-E ects are not used.  e Button light should be “OFF”.