User Manual

ManualsBrandsHammond ManualsElectric and Liturgical OrgansXK3C - 61-KEY MIDI / USB ORGAN WITH VIRTUAL TONEWHEELS

*#1 :-%Owner’s Manual

DRAWBAR

In this mode, you can set the Parameter relating to the Drawbar sound of each part.

To locate this mode:

Touch the [MENU/EXIT] button and display MENU, touch the [PAGE] button and select

PAGE A and choose [1] DRAWBAR.

KEY-CLICK

The “Key Click” is the noise heard every time the key is

touched or released on the B-3/C-3, as the voice is

generated by mechanically switching ON and OFF on

these models. The function on this model simulates

the good old noise.

FOLD-BACK

As the number of the tonewheels was limited on the B-

3/C-3, the organs were designed to repeat the same

octave in the upper-most or lower-most range. This

feature of this model will simulate that.

Setting the Manual Part (LOWER and UPPER)

1. TONE-WHEELS

Select the TONE-WHEEL SET (waveform) for the manual part.

BTBT

ype1ype1

ype1: The traditional Tonewheel Sound of B-3/C-3

BTBT

ype 2ype 2

ype 2: This sound includes more leakage noise and flutter

MellowMellow

Mellow: Transparent sine wave

BriteBrite

Brite: The analog-oscillating sound represented by X-5

SawSaw

Saw: Sawtooth waveform.

2. CLICK - ATTACK LEVEL

The larger the value gets, the louder the click volume. At 4 no key click is pronounced.

Also, the smaller the value gets below 4, the slower gets the attack rate (= the drawbars’

starting-up speed).

3. CLICK - RELEASE LEVEL

The larger the value gets, the louder the click volume. At 4 no key click is pronounced.

Also, the smaller the value gets below 4, the slower gets the release rate (= the drawbar

volume’s fading speed).

4. CLICK - LPF

This allows you to set the tone of the Key-Click.

The setting range is 0 - 127. The larger the value, the brighter the Key-Click.

5. FOLD-BACK - LOW

This allows you to set at which key the 16' Drawbar starts the FOLD-BACK. (Fold-back:

Repeating the same octave in a certain range on the keyboard.)

The first key (= the far left key on the manual, next to the Preset Keys) is displayed as

“1C”. The setting range is 1C - 2C.

6. FOLD-BACK - HIGH

This allows you to set at which key the 1' Drawbar starts to FOLD-BACK (= repeat the

same octave) in the upper-most range. The set range is 4G - 5C.

NOTE: The FOLD-BACK sets not only the 1' but also 1

/3', 1

/5', 2' and 2

/3' Drawbars.

TONE-WHEEL SET

Each Tone-wheel Set allows you to make finer adjust-

ment. (P. 68)

EXAMPLE OF CLICK

Simulating the multi-contact keyboard represented by

the B-3/C-3: AT=8, RL=8

Simulating the PCM Synthesizer that only attack pro-

nounces the key click: AT=8, RL=4

Simulating the single-contact keyboard represented by

the X-66: AT=4, RL=4

The slow envelope like the pipe organ: AT=0, RL=0

2 3

5 6

8 9 10

11 12