*# 1 Model :.- Thank you, and congratulations on your choice of a Hammond XLK-3. The XLK-3 is the lower keyboard unit for Hammond XK-3/3C. In order to get the most out of this instrument for many years to come, first take the time to read this manual in full.
IMPORTANT SAFETY NOTICE 2 DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the appliance is operated. Retain Instructions: The safety and operation instructions should be retained for future reference. Heed Warnings: All warnings on the appliance and in the operation instructions should be adhered to. CAUTION This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of death or serious personal injury.
ATTENTION This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of personal injury or property damage. Heat: The appliance should be situated away from heat sources such as rediators, heat registers, stoves, or other appliance (including amplifiers) that produce heat. Ventilation: The appliance should be situated so that its location or position does not interfare with its proper ventilation.
HOW TO ASSEMBLE 4 Operate carefully to avoid pinching your fingers or dropping anything on your feet. Use a Hammond ST-XLK3 or any other stable stand with 4 legs. Do not use any singe-column type or X-frame type stand. 1. SIDE VIEW Mount the XLK-3 on the keyboard stand. At this time, make sure the center of the stand comes to the center of the XLK-3. Fit the rubber feet of XLK-3 to the holes of the keyboard stand if it has that. Otherwise, or, if it is not stable, there is a risk of turning over.
HOW TO HOOK-UP Place the cable labels as the need arises. 5 Fix the cables by using cable clamps as the need arises. *# 1 :.
HOW TO SET UP 6 After a little while, the PLAY screen will be displayed and the LED on the XLK-3 will automatically light on. Turn on the power of XK-3/3C. Select the page D using the [PAGE] button. Touch the [MENU/EXIT] button. Touch the [2]MIDI button. You can return to the PLAY screen using the [PLAY] button. Select "Seq. Record" by the [1] PARAM button. Touch the [4]RECL (=Recall) button. Now the set up is complete. This set up is stored if the power is switched off.
PLAYING THE XLK-3 When you hook up the XLK-3 to the XK-3/3C and set up as shown on Page 6, the manual on the XK-3/3C operates as the UPPER part, and that of the XLK-3 as the LOWER Part. 7 The XK-3/3C can recall the Combination Preset for the LOWER Part (including the PEDAL), independently of the UPPER Part in the same BANK. RECALL THE LOWER PRESET UPPER: Light LOWER: Blink Slowly The XK-3/3C recalls all Parts (UPPER, LOWER and PEDAL) combined, when you touch the Preset Keys, as the factory default.
USING THE CU-1 LESLIE SWITCH 8 The CU-1 “Half-Moon” shaped Leslie Switch to this keyboard can be attached. This switch controls the Leslie speed (slow, fast, stop) like on the B-3 / C-3. 1. Attaching the body of the CU-1 Operate it similar to the figure left. CU-1 can be used for various instruments. For some a spacer is needed. But do not use the spacer attached to CU-1. XLK-3 can be attached the CU-1 directly. The XLK-3 has 3 holes to attach the CU-1, you can choose the mounting on 2 positions.
TROUBLE SHOOTING 9 In such cases as follows: The XLK-3 does not turn on when the XK-3/3C is switched on. The 8-pin cable used is not right. >> Use only a 8-pin cable supplied with the XLK-3. XLK-3 is powered through the 8-pin cable. The Manual Bass does not function on the XLK-3 manual. The setting of the XK-3/3C is not correct. >> Correct the MIDI template in the XK-3/3C “MIDI” function screen.
MIDI IMPLEMENTATION 10 [Hammond MIDI Keyboard] Model: XLK-3, XLK-B3 Function Default Basic Changed Channel Default Mode Messages Altered Note Number : True Voice Note ON Velocity Note OFF Key's After Ch's Touch Pitch Bender Date: 16-Mar-2007 Version: 2.0 MIDI Implementation Chart Transmitted 2 X 3 X ***** 36 - 96 ***** O *1 X O *2 X X X Remarks Recognized X X X X X X X X X X X *1 When the turn on with pressing the Preset Key *2 transmits as note message for Lower External Zones.
SPECIFICATIONS Keyboard 11 Terminals 73 (61 + 12 Preset keys) Water Fall shape MIDI OUT To Exp. Pedal From Organ Exp. 2 Dimension Accesories 1190(W) x 90(D) x 570(H)mm MIDI cable (1.5m) 8-Pin Cable (1.5m) Cable Label “MIDI” (2pcs) Cable Label “EXP” (2pcs) Cable Clamp (4pcs) Weight 13kg SERVICE Hammond maintains a policy of continuously improving and upgrading its instruments and therefore reserves the right to change specifications without notice.
Printed in Japan 00457-40102 V2.
