Cut Sheet

Specification Sheet
Open Style General Purpose Industrial Control Transformer
HPS Spartan®
15 years
Single Phase
Copper
VA range from 50 VA to 5000VA
Bolted E Core
Copper wound coils with high dielectric strength insulation
Terminal blocks or coil face terminations
Bolt-on mounting brackets
50/60 Hertz (60 Hz on FS***ACP and FS***AR)
Warranty
Phase
Winding Material
Rating
Voltage 10 standard voltage groups
Core
Coil
Termination
Open - Core and Coil. Enclosure
Mounting
Frequency
130°C (80°C rise) insulation system/180°C (115°C rise) insulation systemInsulation System
CSA Certified, UL Listed, CE Marked
Approvals and Standards
Seismically certified in accordance with IBC 2009; Section 1613 Earthquake Loads, for SDS <=2.00g, z/h = 1.0, and
Ip= 1.5
All terminal blocks utilize a combination
slot/Phillips #6 screw with a SEMS washer
Coil face terminations utilize a 1/4 - 20 UNC X 0.50"
slot/Phillips screw and a spring lock washer
Superior insulating materials
Premium packaging which features premium fluted
cartons and custom molded foam inserts.
Features and Benefits
All units supplied with primary and secondary
voltage link/jumpers
Primary and/or Secondary “Fuse Block Adapter
Kit”.(fuse blocks and fuses not supplied)
CE mark approved finger safe primary and
secondary terminal covers for fused and non-fused
transformers.
Custom sizes, ratings and styles available upon
request
Options
PL2- Page 1 of 1SS_sSpa
Data subject to change without notice. Please visit www.hammondpowersolutions.com for the most current data.
Printed: December 18, 2014