Cut Sheet

Specification Sheet
600V Class Commercial Encapsulated Single Phase Buck-Boost/Isolation
Transformer
HPS Universal™
10 year
Single Phase as isolation, single phase and three phase in buck/boost configuration.
Copper
Ratings from 50VA to 5000VA
All welded core construction made with high quality, high permeability silicon steel laminations
Computer designed coils, accurately wound with optimum mean turns made from high quality
magnetic wire with insulation foil,
Front accessible wiring compartment with high and low voltage copper lead wires or tabs.
Designed for vertical or horizontal mounting
50/60 Hertz
Warranty
Phase
Winding Material
Rating
Voltage Three standard voltage groups
Core
Coil
Termination
Heavy Duty Type 3R (Conduit knockouts on sides and rear). Encapsulated with electrical grade silica
sand and resin compounds.
Enclosure
Mounting
Frequency
130°C (80°C rise) for 50 to 1000 VA; 180°C (115°C rise) for 1500 to 5000 VAInsulation System
CSA Certified, UL Listed
Approvals and Standards
Smaller and lighter than general purpose step
down transformers
Applies to a variety of applications
Wiring diagrams are available at
www.hammondpowersolutions.com
Used as an Isolation Transformer, these units are
effective at operating low voltage lighting, machine
tool circuits, relays, bells, small motors and
solenoids.
Used as a buck-boost, units can correct line voltage
problems from 5% to 25% above or below the
nominal voltage. Go to www.hpstoolbox.com to
size your buck-boost applications
Features and Benefits
Economical and efficient
Enclosures: Type 4, Type 4X, Type 12, and others
available
Options
PL9- Page 1 of 1SS_sUni
Data subject to change without notice. Please visit www.hammondpowersolutions.com for the most current data.
Printed: December 18, 2014