Cut Sheet

Specification Sheet
600V Class Hazardous Location Encapsulated Distribution Transformer
HPS Titan®
10 year
Available in single phase and three phase
Copper
Single phase ratings from 0.50 kVA to 37.5 kVA, three phase ratings from 6 kVA to 150 kVA
All welded core construction made with high quality, high permeability silicon steel laminations
Copper wound coils with high dielectric strength insulation
Front accessible wiring compartment with high and low voltage lead wires or copper tabs.
Wall mounting up to 45 kVA and floor mounting for all three phase units above 15 kVA.
60 Hz frequency (50/60 Hz on units with 380V primary)
Warranty
Phase
Winding Material
Rating
Voltage Primary volts: 120, 208/240/277, 347/380, 240x480, 600 Export model available.
Core
Coil
Termination
Heavy Duty Type 3R (Conduit knockouts on sides and rear). Encapsulated with electrical grade silica
sand and resin compounds.
Enclosure
Mounting
Frequency
130°C/180°CInsulation System
UL listed (cULus marked and approved for both the US and Canada)
Approvals and Standards
Seismically certified in accordance with IBC 2009; Section 1613 Earthquake Loads, for SDS <=2.00g, z/h = 1.0, and
Ip= 1.5
Class 2 Div II
Marine Duty
ABS
compliant
All units are encapsulated with electrical grade
silica and resin compounds which completely
enclose the core and coil to seal out moisture,
airborne contaminants and eliminates corrosion
and deterioration
Rear and side entry into an easily accessible and
roomy wiring compartment
Installation made quick and easy via keyhole
mounting slots
Features and Benefits
Electrostatic shield standard on all three phase
units and single phase units over 0.50 kVA
Custom sizes, ratings and styles available upon
request
Type 4/12 gasketting kit.
Stainless Steel Enclosures
Stainless Steel Nameplate
Options
PL30- Page 1 of 1SS_sTitan
Data subject to change without notice. Please visit www.hammondpowersolutions.com for the most current data.
Printed: December 18, 2014