Contents General instructions 1. Care 2. Loading mechanism 2.1 Cocking and loading 2.2 Unloading 3. Trigger 3.1 Trigger finger piece 3.2 Trigger slack 3.3 Trigger pull weight 3.4 Trigger pressure paint 3.5 Trigger stop 3.6 Direct trigger 4. Sights 4.1 Dipterous mounting 4.2 Height and lateral adjusting screw 4.3 Adjustment ranges 4.4 Turning direction 5. Shot speed 6. Compressed air cylinder 6.1 Filling compressed air cylinders 6.2 Emptying the compressed air cylinder 6.
Operating instructions AR I caution: Before using this sports gun, be sure to carefully read the instructions and warnings included in this reference many at! These instructions have been compiled to explain how this sports gun functions, how it must be handled and how it must be maintained, These instructions must always accompany the gun, including with a change of ownership. A\ Warning: Guns are dangerous! Read the instructions and warnings contained herein carefully and precisely before you use the gun
Dear Sports Marksman/Markswoman, Many thanks for aping for the new Aruba Air Gun, You may have already used aur products in other shooting disciplines, f you haven't, however, then we would like to take this opportunity to warmly welcome you as a Hammer marksman/markswomar.
Operating instructions AR3 A Basie Safety Regulations for the Safe Handling of Firearms: The following safety regulations must always 5. Before shooting, ensure that your target be observed by firearms owners! Safe handling of firearms is absolutely necessary for your own safety and the safety of others, 1.
1, Care A Always be unconditional sure that the gun is unloaded! The metal parts must be treated after use for moisture with an acid-free gun oil. The moving parts, especially hammer and valve parts are treated at the factory with a Lang-life grease and don’t have to be greased again. 2. Loading mechanism 2.1 Cocking and loading By cocking the loading lever (43), the loading pin (50 releases the loading recess and cocks the hammer. (fig. 1. Place the Diabolic anti the loading recess as shown in fig.
Operating instructions AR 3. Trigger 3.1 Trigger finger piece {fig. 3) The trigger finger piece (38} can be individually adjusted according to the shooter's trigger finger. After loosening the screw (40}, the trigger finger piece can be pushed forward or pulled back on the guide (36} and can be also be pivoted sideways. The height adjustment is made by moving the O-ring {39}, Another O-ring can be additionally mounted.
4. Sights 4.1 Dipterous mounting Push the dipterous {78) on the prism guide and tighten hand-tight at the required eye base with the knurled screw. Further tightening with a tool, for example, is not necessary. 4.2 Height and lateral adjusting screw Adjustments are made using the two adjusting knobs. The impact point is adjusted distance per click, 5. Shot speed The chamber pressure can be set with the screw {24) and the spring pressure of the hammer spring (4} can be set with the screw (2).
Operating instructions AR 6. Compressed alr cylinder The AR Aft Gun is equipped with a screwiness-off compressed alr cylinder, which is only permitted for compressed air of max, 200 bar. it can be screwed off at any time, filled ar exchanged. A Caution: When fixing/removing the compressed air cylinder, it must be fully screwed on/screwed off. That is, changing the turning direction while fixing/removing must be avoided, as otherwise the O-ring (26} can be damaged.
7. Stock adjustment A\ Caution: The specifications of the 1SS sports ordinance must be observed with all settings on the stock! 7.1 Hand rest (fig. 5} The hand rest (61) can be adjusted length ways by loosening the two screws (62). Caution: By shifting the hand rest forward, the integrated trigger guard is also shifted. 7.
12 Operating instructions AR &, Right /left-handed use The AR Alr Gun is basically designed as a universal gun, that is, it can be converted with very little effort from left to right-handed use. 8.1 Loading mechanism {fig. 8~ 10} Unload the sports gun before changing the invading mechanism, as unintentional activation of the trigger with opened loading lever can cause damaging, As the next step, the screw (53) and the cover {52) can then be rewove.
9. Spare parts list Important; The article and gun number must be provided with each order for a spare part.
1 Operating instructions AR 10, Standard accessories 1700900 Operating instructions 1309130 6kt key sis 1306 140 6kt key sw2 1306120 okt key swag 1206 030 6kt key swy 1405 430 Filling adapter for compressed air pump and cylinder 1701410 Spare O-ring for connection piece 34 170 610 Mounting mandrill for O-ring 11. Special accessories 1702150 Weight stones for hand rest 34170 630 Complete AR50/AR30 compressed air cylinder 12. Technical data Calibrate 477 (.
