Instruction Manual

9. Spare parts list
Hämmerli AP 40
Important: When ordering spare parts the number of
the part and pistol must always be stated.
Pos. Description Art. No.
1 Casing AP 40 274 70 78
2 O-ring ø 10 x 1 274 43 18
3 Barrel 275 34 99
4 Loading fl ap 274 47 26
5 Threaded pin M4 x 0,35 x 4 274 43 76
6 Loading bolt compl. 274 43 88
7 Rear sight with mount compl. 274 47 48
8 Training trigger slide 274 47 38
9 Plug 274 47 44
10 Regulation screw 274 47 46
11 Reduction valve compl. 274 48 60
12 Pressure cylinder compl. 274 48 02
13 O-ring ø 1,07 x 1,27 274 48 52
14 Hammer piece 274 43 72
15 Hammer spring 274 43 74
16 Support ring 274 43 86
17 Gasket 274 43 84
18 Valve plunger 274 43 80
19 Dowel screw 274 42 92
20 Release catch 274 42 82
21 Retaining catch 274 42 78
22 Trigger holder 274 42 94
23 Trigger 274 47 00
24 Pressure spring 274 42 98
25 Pressure spring 274 44 00
26 Safety cord ø 2,5 x 9 274 31 40
27 Post spring screw 274 30 84
28 Retaining catch spring 274 43 08
29 Parallel pin ø 2 x 16 274 47 08
30 Washer 274 43 06
31 Adjusting ring 274 43 00
32 Threaded pin M2 x 2,5 274 43 04
33 Cover 274 47 40
34 Oval-head screw M3 x 6 274 43 02
35 Threaded pin M3 x 10 274 44 14
36 Preassure spring 274 47 36
37 O-ring ø 5,5 x 1,5 274 43 68
38 Front sight carrier 275 35 02
39 Front sight mount 274 47 74
40 Threaded pin M3 x 6 274 47 76
41 Pistol Grip Hi-Grip
®
right/M 274 47 86
42 Grip screw 274 47 82
43 O-ring ø 3,3 x 0,75 274 43 48
44 Pressure spring 274 22 55
45 Steel ball 274 23 06
46 Plug 274 32 64
47 Front, sight 4,7/4,4/3,8 mm 274 37 78
48 Washer 5,3/10/1 274 47 32
49 Retaining ring 274 31 18
50 Oval head screw M3 x 12 274 43 90
51 Threaded pin M5 x 12 274 44 10
52 Spring 274 44 06
Pos. Description Art. No.
53 Spring washer 274 43 46
54 Knurled thumb screws M3 x 12 274 48 00
55 Pin to loading bolt 274 47 34
701 Rear sight right 274 47 68
702 Rear sight left 274 47 66
703 Rear sight spindel 274 44 32
704 Side set screw 274 47 64
705 Sight depth screw 274 47 62
706 Height set screw 274 47 60
707 Rear sight plate 274 47 50
708 Torx-screw M3 x 8 274 47 56
709 Compression spring 274 47 58
710 Cam shaft 274 47 54
711 Steel ball ø 3 274 11 32
712 Compression spring 274 22 54
713 Compression spring 274 29 64
714 Steel ball 274 23 06
715 Compression spring 274 33 20
716 Rear sight mount 274 47 52
717 Rataining ring 274 31 36
10. Standard accessories
Description Art. No.
Instructions with target pattern and
warrenty card 274 48 64
1 x allen key SW 1,5 274 34 50
1 x allen key SW 2,0 274 34 52
1 x allen key SW 2,5 274 34 48
1 x allen key SW 4,0 274 23 70
Screw driver 4 x 55 mm 274 40 14
Filling adapter 274 48 72
Cleaning plugs 274 46 16
Assembley tool for O-ring 274 61 68
Spare O-ring for connector piece 274 60 34
10.1 Special accessoires
Grip Hi-Grip
®
right/M 274 47 86
Grip Hi-Grip
®
right//S 274 47 88
Grip Hi-Grip
®
right//L 274 47 90
Grip Hi-Grip
®
left//M 274 47 96
Grip Hi-Grip
®
Junior 274 47 98
Pressure cylinder AP40 Junior 274 48 06
Weight carrier complet 274 48 66
Front sight, width 3,2/3,6/4,0 mm 274 37 68
Front sight, width 2,4/2,8/3,0 mm 274 37 70
Front sight, width 3,8/4,4/4,7 mm 274 37 72
Front sight, width 3,2/3,6/4,0 mm 274 37 74
height + 1 mm
Front sight, width 3,8/4,4/4,7 274 37 78
height + 1 mm
Gun Case 274 40 26
Pipe protective cap 274 48 44
30 31