Owner's Manual

5.2 Unloading the rifle
- Activate the safety as described (see chap. 2).
- Pull back the bolt lever and then the retainer lever (illustration 5.a) to be able to remove the rotary magazine.
- Remove the rotary magazine (illustration 5.b).
- If there is a pellet in the barrel, remove it with a cleaning brush or proceed as described in chapter 8 “Jams”.
- Never shoot a used pellet. It might damage the rotary magazine and the barrel.
- Remove the pellets from the rotary magazine.
- Make sure the gun is completely unloaded.
- Put the empty rotary magazine back into the air rifle.
- Push the bolt lever forward.
- Hold the air rifle pointing in a safe direction.
- Release the safety and uncock by pulling the trigger and making a dry shot.
- Then engage back the safety.
WARNING: When removing any pellet from the barrel with a cleaning brush, place the rifle horizontally and pointed in a
safe direction (see chapter 8 “Jams”). Do not hold the air rifle in a vertical position, as the pellet could fall into the
mechanism and cause damage.
Never use sharp metal objects to remove pellets from the rotary magazine or the
air rifle. Any damage to the rotary magazine or the barrel could cause faulty operation.
WARNING:
6. Point and shoot safely:
Due to high shooting velocity of this airgun, take particular care and caution in
choosing a safe target. Only choose targets with a safe backstop. Do not choose targets that will cause
ricochets. Never shoot at water.
WARNING: